Surfapore M

The application surface should be dry and clean. Apply SurfaPore M by using a brush, a roller or spraying. No dilution is required. After about 15 minutes, and before SurfaPore M dries completely, remove any application excess with a wet, soft cloth and polish the surface. For extra protection of very sensitive surfaces apply again, within 3 hours after the first application. Maximum efficiency is achieved 24 hours post application. Consumption Rate: Estimated consumption rate 12-18 m2 per litre, strongly dependant on the absorption properties of the surface applied. Packaging: PE Containers 1L, 4L, 30L & IBC 1000L.